1. Begin by removing the cover. There are 5 screws in the back which secure the cover.
2. Next, remove the 2 screws at the top and detach the AC cord from the case.
3. The guts can now be pulled off the chassis. The entire front panel and inner guts
will come out as an assembly. The assembly is free-standing and can be set down.
4. Lastly, unscrew the 12 screws on the shield cover and remove the cover. You can
also unscrew the 2 screws which secure the cover over the attenuator switches. Here
is the unit totally disassembled:
The large tuning capacitor has aluminum fins that mesh. I recommend turning the frequency dial to close these fins for protection. You don't want to bend them, I doubt that you'll find a replacement tuning capacitor! Here are some pictures:
Back to the E-200D Page